NEEWER RGB61 vs RGB62

The short answer

The NEEWER RGB61 and RGB62 share the same basic lighting specifications. Both the RGB61 official listing and the RGB62 official listing claim 61 LEDs, 6W output, 800 lux at 0.5 meter, CRI 97+, and a 2500K to 8500K color temperature range. The practical difference is control: the RGB62 adds Bluetooth app control, light groups, saved presets, GM±50 red/green tone compensation, and firmware updates.

This comparison is for YouTube creators and podcasters choosing a small light for a desk, camera rig, shelf, or portable kit. It uses NEEWER’s published specifications rather than hands-on photometric testing. The RGB61 is the simpler choice if controls on the light are enough. Choose the RGB62 when remote adjustment will make the setup easier to operate.

RGB61 and RGB62 specifications compared

Feature	RGB61	RGB62
LEDs and power	61 LEDs and 6W	61 LEDs and 6W
Maximum illuminance	800 lux at 0.5 meter	800 lux at 0.5 meter
Color temperature	2500K to 8500K	2500K to 8500K
Color rendering	CRI 97+	CRI 97+
Brightness and hue	0 to 100% brightness and 0 to 360° hue	0 to 100% brightness, 0 to 360° hue, and 0 to 100% saturation
Effects	20 scene modes	17 scene effects
App control	Not listed	Bluetooth control in the NEEWER app
Battery	2000mAh	2000mAh, 3.7V, 7.4Wh
Listed full-power runtime	Up to 2.6 hours	Up to 2.6 hours
Listed weight without diffuser	96 grams	110 grams

On paper, neither model has an output advantage. The manufacturer gives them the same LED count, power, maximum illuminance, color temperature range, and color rendering rating. That makes placement and control the useful decision points. It does not prove the two lights produce identical results because NEEWER does not publish a comparative test on either product page.

Choose the RGB62 for remote control

The RGB62’s defining feature is Bluetooth control through the NEEWER app. Its official listing says the app can control between one and eight light groups, save two presets, add settings to favorites, and deliver firmware updates. Those controls matter when the panel is mounted behind a presenter, attached to a high shelf, or used with other lights that need coordinated changes.

Remote control can also reduce interruptions during a recording session. A solo creator can adjust brightness or color without reaching behind the camera. A podcaster can change a background accent while remaining at the desk. Those are workflow benefits rather than improvements in raw output.

The RGB62 also adds GM±50 red/green tone compensation. That control is useful when matching the panel to another light source that looks slightly green or magenta on camera. The RGB61 page lists hue, brightness, and color temperature controls, but it does not list comparable red/green tone compensation.

If you will set the light once and leave it within reach, these additions may not justify buying the RGB62. The physical controls and rear LCD on the RGB61 cover basic brightness, color temperature, hue, and effect selection without requiring a phone.

Choose the RGB61 for simpler local control

The RGB61 keeps the same published core output in a slightly lighter body. NEEWER lists the RGB61 at 96 grams without its diffuser, compared with 110 grams for the RGB62. A 14 gram difference is small, but the RGB61 has the edge when minimizing weight on a compact camera rig.

It also has more listed effects. NEEWER names 20 modes for the RGB61, including candle, television, lightning, emergency flashes, and slow or fast HSI cycling. The RGB62 page lists 17 scene effects, although it does not name them individually. Creators who need a particular simulated effect should verify it on the RGB62 before ordering rather than assuming every RGB61 mode carried over.

Sharkjets Gear includes the NEEWER RGB61 in its YouTube starter kit as a portable fill or accent light. That is the right scale for this comparison. NEEWER recommends keeping either model within 2 meters of the subject, and the published output is measured at half a meter. Neither listing establishes that this pocket light can replace a larger, diffused key light for a wide scene.

Battery and charging are effectively tied

Both lights contain a 2000mAh battery. NEEWER lists a 2.6-hour charging time and up to 2.6 hours of continuous runtime at full brightness for the RGB61 and the same figures for the RGB62. Both charge through USB Type C, and each product package includes a USB cable.

Treat that runtime as the manufacturer’s stated maximum, not a guarantee for every battery and temperature. For a long podcast or repeated video takes, charge before recording and confirm the remaining battery on the light’s LCD. Neither official listing presents battery capacity as an advantage for one model over the other.

Mounting options are similar, but check the adapter

Both models have an integrated rear magnet, three cold shoe mounts around the body, and a bottom quarter-inch threaded connection. The RGB61 listing describes a bottom cold shoe foot with a quarter-inch female thread. The RGB62 listing describes a bottom quarter-inch thread and a cold shoe adapter.

That wording points to a small hardware difference. More importantly, the RGB62 page is internally unclear about what comes in the box. Its mounting description mentions a cold shoe adapter, but its package list names only the light, diffuser, and USB cable. Confirm the current package contents with the seller if the adapter is required for your camera or cage.

A magnet is only useful on a suitable magnetic metal surface. For a dependable desk or overhead position, use the threaded mount with a stand or arm rated for the setup. The side cold shoes can hold a small accessory, but stacking a microphone or another light changes balance and may obstruct camera controls.

Watch for an error in the RGB62 control-distance claim

The RGB62 page gives its app control distance as both 19 feet and 15 meters in the same sentence. Those values are not equivalent. Nineteen feet is about 5.8 meters, while 15 meters is about 49 feet. Because NEEWER’s own page conflicts, there is no single verified maximum range to use from that listing.

Plan around reliable control at the actual shooting position rather than the larger number. Test Bluetooth through the same walls, furniture, and equipment that will be present during recording. If remote range is essential, ask NEEWER to confirm the specification before purchase.

Which one should you buy?

Buy the RGB61 when you want a small magnetic RGB light, expect to control it directly, and value the lower listed weight or its documented set of 20 effects. It provides the same published light output, color temperature range, battery capacity, and full-power runtime as the RGB62.

Buy the RGB62 when app control solves a real placement problem. Its light grouping, two saved presets, favorites, firmware updates, and GM±50 red/green tone compensation can make a multi-light or hard-to-reach setup easier to manage. Do not choose it for greater advertised brightness because the official figures are the same.

Whichever model fits, decide where it will mount and how far it will sit from the subject before ordering. A compact panel works best when its limited size is part of the plan, not when it is expected to light an entire room. Browse Sharkjets Gear for more creator equipment guides.